Balers

Kuhn LSB 1290 iD

Kuhn-LSB-1290-iD

Simple technology that produces rock-hard, super-dense and well-shaped bales characterizes KUHN LSB balers. With a bale chamber dimension of 120cm width and 80cm height on the LSB 1270 or a various bale height of 80/90 cm on the LSB 1290 KUHN LSB balers provide flexibility. Thanks to unique innovations such like Integral Rotor and Power Density the KUHN LSB balers are made for their purpose; baling without compromise. Unique on the LSB balers is that they will bale all various crops such like silage, hay, straw, alfalfa, maize straw and even hemp without any additional changing’s. Where crop cutting is require the OmniCut cutting device will do the job. All main intake functions are protected by cam clutches to provide maximum security and efficiency. After the crop is gathered and pre-compressed in the pre-chamber, the crop is moved upwards into the bale chamber in front of the plunger. Reaching its pre-set length the bale is secured by 6 twines knotted by the patented TWIN-STEP® Knotting system. All LSB models are ISOBUS compatible.

Features:
– All textures have been altered for performance along with changes to make it the 1290 and not the 1270 it once was.
– The model is pretty much the same though added an image file with a picture of a fan and bale mover to the rear for more detail as originally this was left blank.
– This model now benefits from a full intake and working dust particle system, the particle system has a small delay for when the collector is raised or switched off, this so the dust particles continue.
– The wheels are taken from the original krone and are set up in the XML for rear steer.
– Weight and physics
– Auto counting bales with Kuhn designed HUD, to close work mode, press X and the last one or two bales will evacuate.
– RPM – Enter work mode and turn the pto on, this will raise the RPM level up.
– This mod has full lighting using proper light decals as well as some coronas
– Bales have been modified from the standard ones they once were, They have a new model and have been set up similar to the quadrant ones.
– Fruit Types: wheat_windrow, barley_windrow, dryGrass_windrow, grass_windrow

Authors: Daniel11, Xandl1, Petorious, Decker

DOWNLOAD 5 MB

Ford 551 v 3.1 MR

Ford-551-v-3.1-MR

– Replaced bales by Original Giants bales with new texture (bales of original mod were all regarded as straw by feed mixer)
– Inserted planes for loading progress, now the bale grows with increasing filling (it vanishes at 99% to be replaced by bale to unload)
– Power Take Off adapted to LS13
– Added dust
– Added turn lights

Authors: ccs101, Manuel Leithner, SFM-Modding, Sven777b

DOWNLOAD 5 MB

John Deere 1434

John-Deere-1434

New press John Deere is a guarantee of quality. Mod works well even on large acreages. Press has a very similar structure to some models, press manufacturer Kuhn.

Authors: xandl1, Cynek96

DOWNLOAD 2 MB

Laverda LB 12.70

Laverda-LB-12.70

With this quad baler you can press straw and hay into bales

Authors: Giants Software, tiger1234, bertram-79, SMLS2013, mod-scheune, Cynek96

DOWNLOAD 1 MB

John Deere 864 Premium v 1.1

John-Deere-864-Premium-v-1.1

– RealLights
– Variable Chamber – Create bales in sizes between 0.9 to 1.8m in diameter
– Manual netting – Can’t fill the baler up but want it emptied net the bale manually
– Cover Edge net – If the baler runs out of net, buy more at the store to refill it
– Opening side panels and rear Cover Edge door
– Manual support and attachable PTO
– Autoleveling pickup
– Particle systems for pickup and generic “dust”
– Adjustable drawbar
– Bale Trak Plus monitor – If your tractor features IC with ControlPanelAttacher like these, the monitor will appear in the cab when attached
– Blockage with drop floor unplugging – The pickup might become blocked, depending on speed and swath density
– Animated fill-level indicator, as well as multiple other parts
– Washable
– Fixed spelling error in bales-i3d – Bales should no longer turn up as straw in the mixer unless they are in fact straw bales
– Tweaked support animation
– Should now be compatible with Course Play
– Fixed issue where baler would not attach to certain vehicles
– Fixed issue where some help-texts would be displayed for both client and host

Authors: JoXXer, AzoaX, GIANTS, fruktor

DOWNLOAD 15 MB

John Deere 864 Premium Baler v 1.0

John-Deere-864-Premium-Baler-v-1.0

– Real Lights
– Variable Chamber – Create bales in sizes between 0.9 to 1.8m in diameter
– Manual netting – Can’t fill the baler up but want it emptied. Net the bale manually
– Cover Edge – If the baler runs out of net, buy more at the store to refill it
– Opening side panels and rear Cover Edge door
– Manual support and attachable PTO
– Autoleveling pickup
– Particle systems for pickup and generic dust
– Adjustable drawbar – Is the tractors attacher a bit off. Adjust the drawbar to compensate
– Bale Trak Plus monitor – If your tractor features IC with Control Panel Attacher like these, the monitor will appear in the cab when attached
– Blockage with drop floor unplugging. The pickup might become blocked, depending on speed and swath density
– Animated fill level indicator, as well as multiple other parts
– Washable

Authors: JoXXer, Freddys 864, AzoaX, GIANTS, fruktor

DOWNLOAD 15 MB